PDF XChange Forum

rakunavi

Hello Richi, You might try specifying the input as a folder as shown below. wsh.Run "cmd.exe /C start PDFXTools.exe /RunTool:showui=no;showprog=no ;subfolder=no pdft.tool.splitMergePDF C:\TEMP /Output:folder=C:\TEMP\Output\;filename=Mergetest.pdf;showfiles=no;overwrite=yes" Best regards, r...

rakunavi

Hello Daniel, It seems to me that you have not correctly understood Jensen Head's argument. He is not saying that pages are not deleted, but rather that they are unintentionally deleted. The current behavior could lead to the danger of unintended data loss. I read his report and concluded that this ...

rakunavi

Hello Daniel, thank you for creating the ticket. I would also like to thank all those who have voted so far. I am glad to see that some of the developers understand the usefulness of the Lasso Select tool. I believe that there are two major usefulnesses of the Lasso Select tool. Usefulness #1 First,...

rakunavi

Hello Davide78,

You may want to use the "Select and Delete" tool or the "Mark for Redaction" tool.

This is a GIF animation. Click to play.

Please forgive me if my comment is off the mark.

Best regards,
rakunavi

rakunavi

Hello broshake3451,

The following topic may be of interest to you.

Is exporting selected bookmark range to pdf no longer available?
viewtopic.php?t=46258

Best regards,
rakunavi

rakunavi

Hello all, It is not very important, but I have noticed that when using multi-window mode, clicking the File tab in another window from an active window only activates that window on the first click; it does not open the File tab. The second click finally opens the File tab. If you observe the scree...

rakunavi

Hello Daniel, thank you for looking into this.

I am relieved that you have already found the issue.
Please give my best regards to the developer.

Best regards,
rakunavi

rakunavi

Hello Davide78,

The situation does not seem to have changed much since your previous post on the following topic.

Create linked notes
viewtopic.php?t=40096

Best regards,
rakunavi

rakunavi

Hello all, After selecting an area with a tool such as the Snapshot tool and then activating the Zoom In/Out tool, I have noticed that the left and right mouse buttons temporarily stop functioning on the page view. Once outside of the page view, the buttons will work again, and selecting the Hand to...

rakunavi

Hello mCHSNUg5Pz8cPap, thank you for your comment!
And Daniel, I appreciate you reaching out to the developers.

Nice to see the wheels turning again.
I hope that the new internal chat system will ease the burden on all of your staff.

Best regards,
rakunavi

rakunavi

Hello Daniel, thank you for contacting developers. Currently, the Colorize Document feature works at the page level, but it would be greatly appreciated if it could be done from the context menu of the base content, similar to the Recompress Images feature. There would be as much demand for coloriza...

rakunavi

Hello siSINka, With some scripting language, I think you can achieve something close to what you want to do, even with only the PDF-XChange Editor. Here is an example script for AutoHotkey v1. #NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases. ; #Warn ; Enable wa...

rakunavi

Hello Daniel, thank you for bringing this matter to the attention of the development team. I am glad to hear that the problem has already been resolved. Incidentally, the "Cannot open the document." error dialog appears when a file that has already been deleted is opened from the history, ...

rakunavi

Hello all, I noticed that the "Colorize Document" feature added in build 396 cannot convert images with BPC of 1 and ColorSpace of DeviceGray to the specified color. The sample file consists of three pages, each converted using the "Rasterize Pages" function of the PDF-XChange Ed...

rakunavi

Hello all, I have noticed that in the "Image To PDF" dialog, which can be opened in one of the following ways, the size of all loaded image files is displayed as 0 bytes. File Tab > New Document > From Images Organize Tab > Insert > Insert Images figure.png This has been occurring since bu...

rakunavi

Hello all, The problem reported in this topic is still occurring as of build 396. I have no new information, but it has already been two years since @David.P first reported it. Focus is lost when moving content items with arrow keys https://forum.pdf-xchange.com/viewtopic.php?t=40263 I am concerned ...

rakunavi

Hello all, The size of the thumbnails in the Thumbnails pane can be changed by using the Zoom In/Zoom Out commands in the toolbar or Ctrl+Wheel on the mouse, but from what I have found, the size changes linearly, even though there are 98 steps in total. Therefore, the larger the size, the more slugg...

rakunavi

Hello Vasyl, I really appreciate you taking the time out of your busy schedule to read my message.

I hope you find a fundamental solution that is both effective and reasonable for the translators.

Best regards,
rakunavi

rakunavi

Hello all, The problem reported in this topic still persists in build 396. For reference, in Strings.en-JP.xcl, replacing '：' (Unicode codepoint: U+FF1A) with ':' (Unicode codepoint: U+003A) for items that may be related to the Edit Action List, the vertical lines align as shown on the right side of...

rakunavi

Hello Daniel, thank you for contacting developers. If the selection frame of objects were to automatically expand when the size of the selected objects are small, it would not only make it easier to move the objects, but would also have the advantage of making the objects visible while they are bein...

rakunavi

Hello all, I have found that when the Autoscroll command (ID: cmd.view.layout.autoScroll) is executed with multiple windows open, button faces other than the operating window are also unnecessarily pressed. PDF-XChange Editor commands are divided into two types: those that work only for the operated...

rakunavi

Hello titeuf, The developers are already aware of this issue and it will be resolved in a future release. [build 396] In Crop Pages dialog, preview screen is significantly corrupted when dialog size is changed from the default https://forum.pdf-xchange.com/viewtopic.php?t=46259 Best regards, rakunavi

rakunavi

Hello Daniel, I really appreciate your detailed and kind response. Before build 396, the Links pane was so slow that I routinely used the Export to XFDF feature. If you just export to an XFDF file, the file is generated in an instant, without having to wait for the Links pane to finish displaying. T...

rakunavi

Hello titeuf, The following topic may be of interest to you. Is exporting selected bookmark range to pdf no longer available? https://forum.pdf-xchange.com/viewtopic.php?t=46258 Please forgive me if my comment is off the mark. If so, it might be be helpful to the PDF-XChange support staff if you cou...

rakunavi

Hello AxJ, Is the "Inertial Scroll" option, which can be set from the Format tab of the Hand Tool, enabled? figure.png From build 361 to build 396, this option is enabled by default, so it should not be disabled unless you intentionally change it, but I recommend that you check just in cas...

rakunavi

Thank you Daniel and Vasyl for your reply. I have successfully confirmed that my quota limit has been relaxed. I appreciate your generous and prompt action. Please give my best regards to Dimitar. I am also relieved that you already know about the crop pages dialog issue. I look forward to future up...

rakunavi

Hello EndUser, As you say, since build 396, the second request I made in this post has been implemented, and the Bookmarks pane options menu and context menu have been revised as a result. So if you want to extract pages by sections of bookmarks, you will need to change your method. Specifically, af...

rakunavi

Hello David.P, thank you for your comment! And Stefan, I appreciate you reaching out to the developers. In my last post , I reported that the "caseA.pdf" sample file, with one link per page for 5000 pages, took 16 minutes and 58 seconds to display the link pane all the way through in build...

rakunavi

Hello all, When closing an unsaved file, a dialog box appears asking if you want to save the file, and I noticed that in build 396, shortcut keys such as Tab no longer work in that dialog box. I am used to using shortcut keys almost unconsciously, so it would be appreciated if shortcut keys could be...

rakunavi

Hello all, In build 396, I noticed that when changing the size of the Crop Pages dialog box from the default, the following parts are displayed incorrectly. Cropped page size information displayed at the bottom of the preview Size and position of the preview area Scroll bars throughout the dialog Th...

rakunavi

Hello Daniel, thank you for taking the time out of your busy schedule before the release of the new build. Thank you for creating the ticket. It is very important to distinguish between "1-1-1" and "111" as the 1-1-1 format is often used in page numbering. I hope that the root ca...

rakunavi

Hello AxJ, The following topic may be of interest to you. Middle button drag no longer scrolls https://forum.pdf-xchange.com/viewtopic.php?t=45268 Please forgive me if my comment is off the mark. If so, it might be be helpful to the PDF-XChange support staff if you could be a little more detailed. B...

rakunavi

Hello Aceus0904, thank you for your feedback.
You're welcome, I'm glad I could help.

Best regards,
rakunavi

rakunavi

Hello all, I would also like to add some additional information. A similar strange behavior can also be seen in the "Links from Bookmarks" feature. To ensure accuracy of verification, I have created a new sample file that covers all possible combinations that can occur with or without a hy...

rakunavi

Hello PetrKrysl, thank you for your reply. I finally understand what you are trying to say. It is true that when the selection area is as small as the size you indicate, the points at which the crosshair cursor appears are limited. In order to drag while maintaining the crosshair cursor, careful man...

rakunavi

Hello PetrKrysl, Have you enabled the exclusive mode for the Pencil tool? The default setting of PDF-XChange Editor leaves the exclusive mode disabled for the Pencil tool. In that case, immediately after pasting a screenshot, as shown in the video below, the pasted screenshot should be selected and ...

rakunavi

Hello PetrKrysl, Have you paid attention to the type of mouse cursor? In order to move the entire selected comment, the drag must be initiated when the mouse cursor is "Move cursor" in the shape of a crossed arrow. The mouse cursor should be "Move cursor" if there is a circular g...

rakunavi

Hello all, I have found that setting "all of these words" equal to "any of these words" or "this exact phrase" equal to "any of these words" when specifying the search terms produces search results that accurately reflect the presence or absence of hyphen-minu...

rakunavi

Hello Daniel, thank you for your reply.

We, the users, will quietly watch to see how adequately you can assess the importance of the issue, and then judge the value of the software.

Best regards,
rakunavi

rakunavi

Hello Daniel, thank you for taking the time to look into this. You have a similar thought process to mine. I also thought for a moment to write that "crazy idea" you wrote about. For example, something like this, using "320001" as the search term to exclude "3-20001 32-0001 ...

rakunavi

Hello all, When using the find or search commands in the PDF-XChange Editor, results that include hyphen-minus (*) are also shown. (*) Hyphen-minus "-" : U+002D https://en.wikipedia.org/wiki/Hyphen-minus For example, when searching for "320001", not only "320001" but al...

rakunavi

Hello Daniel, thank you for contacting developers.

I am relieved to share the situation with you.
Thank you for taking the time out of your busy schedule.
Please give my best regards to the developer.

Best regards
rakunavi

rakunavi

Hello Remy Allez, As stated on the top of the support page , it is a rule to use the latest release when posting any issues on this forum. So, what Daniel says is most likely true, but I would like to comment on something that concerns me. Please ensure you are using the latest release of the produc...

rakunavi

Hello Aceus0904,

The following script might align with your wish.

Code: Select all

for (var k = 0; k < this.numPages; k++) {
    this.setPageLabels(k, ["D", "", (k * 2) + 1]);
}

This is a GIF animation. Click to play.

Best regards,
rakunavi

rakunavi

Hello Daniel, thank you for taking the time to look into this. I am not deselecting the typewriter or textbox comment. In the video, the mouse cursor is moved to indicate the point of interest for presentation purposes, but the save command silently goes from grayed out to active without moving the ...

rakunavi

=== UPDATE =================================================================== The issue reported below has been resolved in Ver 10.6.0 build 396. I appreciate all the hard work and efforts of the support and development team. ========================================================================...

rakunavi

Thank you, Stefan, for creating the ticket!

Thank you for taking time out of your busy schedule.
Please give my best regards to developers.

Best regards,
rakunavi

rakunavi

Hello all, In PDF-XChange Editor, the status of the Save command in the Quick Access Toolbar and the asterisk at the end of the window title are linked. That is, if the file has been edited, the Save command is active and can be pressed, and an asterisk (*) will appear at the end of the window title...

rakunavi

=== UPDATE =================================================================== The issue reported below has been resolved in Ver 10.6.0 build 396. I appreciate all the hard work and efforts of the support and development team. ========================================================================...

rakunavi

=== UPDATE =================================================================== The issue reported below has been resolved in Ver 10.6.0 build 396. I appreciate all the hard work and efforts of the support and development team. ========================================================================...

Search found 1646 matches