Page 1 of 1
Replace fonts - Add from selection do not working
Posted: Wed Jul 21, 2021 12:40 pm
by lindermman
Hi ... one more time!
Replace fonts - add from selection - do not enabled. Yea! I selected a part of the text and click on ´ "Replace fonts" to show which font I want to replace, but "Add from Selection" is not enabled. What happened?

Re: Replace fonts - Add from selection do not working
Posted: Wed Jul 21, 2021 1:39 pm
by Sasha - PDF-XChange
Hello lindermman,
Can you please provide more details and preferably a screenshot of what you are doing? We've tried this here and everything is working correctly.
Basically you will have to use the Text Select tool (not the Edit Text tool) and everything will work for you correctly.
Cheers,
Alex
Re: Replace fonts - Add from selection do not working
Posted: Wed Jul 21, 2021 2:22 pm
by lindermman
I do it the same way I did in the .334 version, but now it doesn't work anymore. I Edited the text, selected and clicked on "replace fonts". There was usually already an option that I had used before. Then I erased and the option "add from selection" was available there.
However, following this same procedure, function "add from selection" is no longer available.
And it doesn't work by trying to change PDF fonts without editing the text and just using the Text Select tool.
The program opens an error message and closes: with the Text Select tool, the function "add from selection" is available, but the program can't (doesn't understand) that I want to edit the text of the file, not the comments. Then it opens an error message and closes.
There won't be much use in this tool by removing the option to change fonts from the file body and just changing the fonts of comments.

Re: Replace fonts - Add from selection do not working
Posted: Thu Jul 22, 2021 8:21 am
by Sasha - PDF-XChange
Hello lindermman,
After further investigation, I can tell more. The thing is that in the 354 build, when editing text and then launching the dialog, the editing box persisted and one could launch the Replace Fonts dialog and use Add from selection.
Right now, when the dialog is being launched the Edit text tool automatically applies current text edit and removes the selection.
How I made it work correctly right now is use the Edit Text tool after you have finished the text editing. But not to Edit text inside of the text block, but to select the needed text block with it.
As for the error message - I did not manage to recreate this here. Can you please provide more detail on how one could recreate this one?
Cheers,
Alex
Re: Replace fonts - Add from selection do not working
Posted: Thu Jul 22, 2021 2:28 pm
by lindermman
Thanks for listening!
Really, this is exactly the problem: when you open a text edit, the selection is undone and it becomes impossible to create a new option using an "add from selection" tool. If possible, please fix this! I really need this option!
The error message was my mistake. There is no error message, really. At least I didn't reproduce it either, anymore. However, the system crashes and the program closes. This is real.
Re: Replace fonts - Add from selection do not working
Posted: Fri Jul 23, 2021 7:04 pm
by lindermman
up!
Re: Replace fonts - Add from selection do not working
Posted: Sat Jul 24, 2021 12:35 am
by Vasyl - PDF-XChange
Hi Lindermman.
If you want to use 'Add from selection' option in ReplaceFonts feature - please
1. Enable the simple SelectText tool
2. Select any portion of text with fonts that must be replaced
3. Launch ReplaceFonts dialog. The 'Add from selection' will be available for you as should.
And in next build we will fix problem you reported, for sure.
Cheers.
Re: Replace fonts - Add from selection do not working
Posted: Sat Jul 24, 2021 5:50 am
by lindermman
Vasyl-Tracker Dev Team wrote: ↑Sat Jul 24, 2021 12:35 am
Hi Lindermman.
If you want to use 'Add from selection' option in ReplaceFonts feature - please
1. Enable the simple
SelectText tool
2. Select any portion of text with fonts that must be replaced
3. Launch ReplaceFonts dialog. The 'Add from selection' will be available for you as should.
And in next build we will fix problem you reported, for sure.
Cheers.
Okaaaay, it woooorked!

\o/
But it got a little weird. In the old way I thought it was better.

Re: Replace fonts - Add from selection do not working
Posted: Sat Jul 24, 2021 6:07 am
by lindermman
Sorry! I don't want to be boring. I understand this is a matter of custom and a way to give more functionality to the simple "SelectText" tool, but I think that, in the same way that the option "Copy text style" is not enabled with the selection through the simple "SelectText" tool , the "ReplaceFonts" option should follow the same path.
Another reason is the fact that if the text is highlighted in any way, the simple "SelectText" tool is not so functional. However, in the old form, it works better.
Sorry! Just my way of thinking and a mere suggestion. I don't want to create a mess.

Re: Replace fonts - Add from selection do not working
Posted: Mon Jul 26, 2021 12:08 pm
by lindermman
I made an animated gif to help understand the situation.
https://1drv.ms/u/s!Al1YdZxdWgRdgcgtrrm10060Q6KZBw
Let me explain better the image that justifies this request:
Note that from the beginning I carry out the procedure as told by my friend Vasyl Yaremyn.
OK. It works.
However, if I try to repeat the procedure in a part of the text that already has some kind of highlighting, the procedure is already complicated. You can do it, yes, using the Shift key, but remembering that every time is sad. Especially when using this dozens of times over the same file.
So, realize that, even with any type of markup, if the tool's functionality was kept as it was until version .354, keeping the "Add from Selection" function available when editing the text, it would be better, easier and more consistent with the Copy Styles tool and apply them.
Re: Replace fonts - Add from selection do not working
Posted: Mon Jul 26, 2021 6:27 pm
by Vasyl - PDF-XChange
Hi Lindermman.
You can do it, yes, using the Shift key, but remembering that every time is sad. Especially when using this dozens of times over the same file.
You are right. In the near future we will make the following behavior: if you have to select text 'covered' by highlight annotation - the simple mouse click on that region will just select the annotation(as it is currently). But after short interval the mouse cursor will be changed to the 'select text' appearance and you will be able to start text selecting. Also, the mouse-down-on-text-and-move over the highlighted text - it will start text selecting immediately, ignoring the existing highlight-annotation(s) completely.
According to the
https://1drv.ms/u/s!Al1YdZxdWgRdgcgtrrm10060Q6KZBw
- seem there is a bug and we will fix it soon. Thanks for detailed info.
Cheers.
Re: Replace fonts - Add from selection do not working
Posted: Mon Jul 26, 2021 9:17 pm
by lindermman
Vasyl-Tracker Dev Team wrote: ↑Mon Jul 26, 2021 6:27 pm
In the near future we will make the following behavior: if you have to select text 'covered' by highlight annotation - the simple mouse click on that region will just select the annotation(as it is currently).
It seems good! But I still keep my suggestion from previous posts about the "replace fonts"-> "add from Selection" tool.
May the force be with you!
Replace fonts - Add from selection do not working
Posted: Tue Jul 27, 2021 11:34 am
by Stefan - PDF-XChange
Re: Replace fonts - Add from selection do not working
Posted: Mon Aug 02, 2021 2:45 pm
by lindermman
However, another problem with disabling the "Replace Fonts" function --> "Add from Selection": there is no "Replace fonts" option in the right click menu.
Please re-enable the "Add from Selection" function as it was in version .354. Please!
Re: Replace fonts - Add from selection do not working
Posted: Tue Aug 03, 2021 9:14 pm
by Daniel - PDF-XChange
Hi, lindermman
From what I can see, this option is still working as before, simply use the "select text" tool to select some text on the page before you open the "replace fonts" dialog:
image.png
Kind regards,
Re: Replace fonts - Add from selection do not working
Posted: Tue Aug 03, 2021 9:15 pm
by Daniel - PDF-XChange
Hi again,
On re-reading your post Lindermman, I realize you were specifically asking about the right-click menu. I have informed the Dev team about this and hopefully it should be restored in the next release.
Kind regards,
Re: Replace fonts - Add from selection do not working
Posted: Wed Aug 04, 2021 5:57 am
by lindermman
TrackerSupp-Daniel wrote: ↑Tue Aug 03, 2021 9:14 pm
Hi, lindermman
From what I can see, this option is still working as before, simply use the "select text" tool to select some text on the page before you open the "replace fonts" dialog
Kind regards,
simply using the "select text" tool to select some text on the page before opening the "replace fonts" dialog is not consistent with the copy/apply styles policy. I say this as an ex programmer. So, it's not for nonsense that I ask you to return the tool to work as it was in the .354 version. It doesn't make sense how it got now.
Re: Replace fonts - Add from selection do not working
Posted: Wed Aug 04, 2021 5:04 pm
by Daniel - PDF-XChange
Hi, lindermman
The Dev team is now aware of the differences from previous handling, and is working on restoring it. I cannot promise when this will be back to normal, but it is in the works currently.
Kind regards,